One (1) QUART of ChemFill 2K HS Urethane Primer Surfacer
One (1) HALF PINT of UA Activator
One (1) HALF PINT of UR Reducer
ChemFill UP61 is a two component polyurethane primer surfacer designed with urethane reactant copolymers, filling extender pigments, and additives to create a primer that applies easily, fills imperfections, and dries quickly to an easy sanding finish. Mixes 4 parts UP61 series primer with 1 part UA Series activator and then reduce as needed (typically applied at 4:1:1). May be reduced with additional reducer for use a 2K urethane sealer. Available in quarts and gallons.
Does this product meet my local VOC requirement?
Check our “Low VOC Requirements” tab for more information. We offer Low V.O.C. finished for customers in areas that require low V.O.C. compliance. Contact us for more information at [email protected].
NOTE: Automotive paints, such as those represented on this site, can be hazardous to your health, and as such, require specialized equipment and training to use properly and safely. These products are designed for use by professionally trained autobody painters with proper personal protective equipment (PPE) in an approved spray booth and are not recommended for at home or "do it yourself" type applications.
WARNING: This product contains a chemical known to the State of California to cause cancer.
Many states, counties, and/or municipalities have regulations regarding the application of low volatile organic compound (VOC) paint. The states shown in red below currently require the purchase of low VOC paint, but it there are other areas with regulations.
Before ordering, please check your local regulations. If you need more information concerning low VOC products, please email us at [email protected].
Canada and several US states have laws requiring the use of Low VOC coatings. Be sure to check local regulations before ordering.
Alabama
Our LOW VOC product is NOT required.
Alaska
Our LOW VOC product is NOT required.
Arizona
Our LOW VOC product is NOT required.
Arkansas
Our LOW VOC product is NOT required.
California
Most of California REQUIRES the use of LOW VOC automotive coatings. However, the following districts DO NOT require the use of LOW VOC coatings when applied in these districts; Amador County APCD, Calaveras County APCD, Great Basin Unified APCD, Lake County AQCD, Lassen County APCD, Mariposa County APCD, Mendocino County AQMD, Modoc County APCD, Monterey Bay APCD, North Coast Unified AQMD, Northern Sierra AQMD, Northern Sonoma County APCD, Siskiyou County APCD, Tuolumne County APCD
Colorado
Our LOW VOC product is NOT required.
Connecticut
Our LOW VOC product is NOT required.
Delaware
Delaware REQUIRES LOW VOC automotive coatings. However, Delaware has an exception in section 11.1.2.2 stating “where the use or application of that coating or cleaning solvent is by a person who does not receive compensation for such use or application”. In other words, our understanding from the rule is that if you are paying a painter to paint your vehicle then have to use LOW VOC coatings but if you are not paying someone to paint your vehicle then you can use the standard non-LOW VOC materials.
Florida
Our LOW VOC product is NOT required.
Georgia
Our LOW VOC product is NOT required.
Hawaii
Our LOW VOC product is NOT required.
Idaho
Our LOW VOC product is NOT required.
Illinois
Our LOW VOC product is NOT required.
Indiana
Our LOW VOC product is NOT required.
Iowa
Our LOW VOC product is NOT required.
Kansas
Our LOW VOC product is NOT required.
Kentucky
LOW VOC automotive coatings are NOT required unless you are in Jefferson County and painting more than 1 vehicle a week or performing more than 5 spot/panel repairs per week in Jefferson county.
Louisiana
Our LOW VOC product is NOT required.
Maine
Our LOW VOC product is NOT required.
Maryland
Maryland REQUIRES LOW VOC automotive coatings. However, Maryland has an exception in section 2 of rule 26.11.19.23 stating “An automotive coating applied to motor vehicles or mobile equipment or their associated parts and components by a person who does not receive compensation for the application of the coating.” In other words, our understanding from the rule is that if you are paying a painter to paint your vehicle then they have to use LOW VOC coatings but if you are not paying someone to paint your vehicle then you can use the standard non-LOW VOC materials.
Massachusetts
Our LOW VOC product is NOT required.
Michigan
Our LOW VOC product is NOT required.
Minnesota
Our LOW VOC product is NOT required.
Mississippi
Our LOW VOC product is NOT required.
Missouri
Our LOW VOC product is NOT required.
Montana
Our LOW VOC product is NOT required.
Nebraska
Our LOW VOC product is NOT required.
Nevada
Our LOW VOC product is NOT required.
New Hampshire
Our LOW VOC product is NOT required.
New Jersey
Our LOW VOC product is NOT required.
New York
Our LOW VOC product is NOT required.
North Carolina
Our LOW VOC product is NOT required.
North Dakota
Our LOW VOC product is NOT required.
Ohio
Our LOW VOC product is NOT required.
Oklahoma
Our LOW VOC product is NOT required.
Oregon
Our LOW VOC product is NOT required.
Pennsylvania
Our LOW VOC product is NOT required.
Pennsylvania
Our LOW VOC product is NOT required.
Rhode Island
Our LOW VOC product is NOT required for painting cars and passenger trucks. If painting buses or mobile equipment then LOW VOC is REQUIRED.
South Carolina
Our LOW VOC product is NOT required.
South Dakota
Our LOW VOC product is NOT required.
Tennessee
Our LOW VOC product is NOT required when painting Passenger Cars, large-sized truck cabs & chassis, light & medium duty trucks and vans, motor homes, recreational vehicles and motorcycles. LOW VOC IS REQUIRED if you are painting Buses & Mobile equipment AND emit more than 15 lbs per day VOC (spraying 2-3 gallons per day).
Texas
Our LOW VOC product is NOT required.
Utah
Most of Utah DOES NOT require LOW VOC automotive coatings. However these counties DO REQUIRE LOW VOC for facilities that use a combined 20 gallons or more of coatings and solvents per year: Box Elder, Cache, Davis, Salt Lake, Tooele, Utah, and Weber Counties
First time I used products from here. The paint had a lot of solids in the bottom of the can. Took a lot of stirring to get them dissolved. However, it sprayed great with a 1.7 nozzle at 50psi at the gun. I use a cheap Chinese hvlp gun and find I need more pressure than suggested. I will definitely buy this product again. Going to shoot their base and clear next. Customer service is great too!
Rated 5 out of 5
WILLIAM (Verified Customer)–
Went on smooth and filled minor sanding scratches. I will use again. Sands easily too.
WARNING: This product contains a chemical known to the State of California to cause cancer.
Richard Green (Verified Customer) –
Bill Crofutt (Verified Customer) –
First time I used products from here. The paint had a lot of solids in the bottom of the can. Took a lot of stirring to get them dissolved.
However, it sprayed great with a 1.7 nozzle at 50psi at the gun. I use a cheap Chinese hvlp gun and find I need more pressure than suggested. I will definitely buy this product again. Going to shoot their base and clear next. Customer service is great too!
WILLIAM (Verified Customer) –
Went on smooth and filled minor sanding scratches. I will use again. Sands easily too.
Darren Shears (Verified Customer) –
John Smith (Verified Customer) –
works much better w/reducer
Michael (Verified Customer) –
Eric Smith (Verified Customer) –
James J. (Verified Customer) –
louis (Verified Customer) –
Great product
jim salkowitz (Verified Customer) –
Chris (Verified Customer) –
Anonymous (Verified Customer) –